tech-sheet-36-32090401-0
Amana Technical Information Electric Range

ACF4265AB PACF4265AB1 ACF4265AC PACF4265AC1 ACF4265AS PACF4265AS1

ACF4265AW PACF4265AW1

Due to possibility of personal injury or property damage, always contact an authorized technician for servicing or repair of this unit.

Refer to Service Manual RS2320006 for detailed installation, operating, testing, troubleshooting, and disassembly instructions.

Refer to Parts Manual RP2320102 for part number information.

! CAUTION

All safety information must be followed as provided in Service Manual RS2320006.

! WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power to oven before servicing, unless testing requires power.

Model ACF4265A Model ACF4265A Power Source @ 240 V / 208 V Cooktop Surface Upswept 13.2 KW X Electrical rating 240 VAC ………. 10.1 KW Oversized glass ceramic Spillsaver 208 VAC ………. 40 Amp X 60 Hz Frameless glass door with window X Amperage Interior oven light X Frequency 1,200 / * Watts Two oven racks 6 positions X Element Wattage @ 240 V 1,500 / *Watts Removable full width storage drawer X 6-inch ribbon radiant 2,000 / *Watts Electronic Range Control 7-inch ribbon radiant 2,500 / *Watts 47 (119) 8-inch ribbon radiant 100 / *Watts Product Exterior Dimensions in. (cm) 30 (76) Dual ribbon radiant Height overall 28 13/16 (73) Warming Zone element 2,800 / *Watts Width 22 (56) Oven Wattage @ 240 V 3,000 / *Watts Depth oven door closed with handle 36 (91) Bake 6 pass Clearance oven door Broil 6 pass 19 (48) Height of cooktop 171 (78) Oven Interior Dimensions in. (cm) 24 1/4 (61) Height 19 (48) Weight lbs. (kg) Width Approximately shipping weight Depth

* Rating of 208 VAC is approximately 80% of 240 VAC value.

October 2001 1 36-32090401-0

Component Testing Procedures

! WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power to oven before servicing, unless testing requires power.

Illustration Component Test Procedure Results 31823701 Oven light socket Remove one wire from receptacle Indicates continuity with bulb screwed in. and test resistance of terminals.

31722801 Oven indicator Measure voltage at oven light. 120 VAC, see wiring diagram for terminal light identification. and Remove one lead from switch If no voltage is present at oven light, check Surface indicator terminal and measure resistance wiring or light switches. light across terminals. Switch closed: 0 Measure voltage at indicator light. Switch open: Infinite resistance

Measure continuity of switch If voltage is present and light does not positions: operate. Replace light. Closed If no voltage is present at indicator light Open check wiring. Remove one wire lead from element 31986601 B˘Black Rocker switch and measure resistance of the 31986602 W˘White element. 31986603 C˘Bisque Continuity, if not replace. Verify supply voltage Remove wiring from terminals H1 Infinite, if not replace. and H2. Connect Volt ohms meter to 31938901 1200 W Ribbon radiant H1 and H2. Continuity, if not replace. 31939001 1500 W elements, limiters 31939101 2000 W are not Measure the following for voltages at 1200W: 44 to 49 Approximately 32054701 Dual Ribbon replaceable. LO, MED, HI: 32007001 Warming Zone 1500W: 36 to 40 Approximately H1 to H2 2000W: 26 to 30 Approximately Measure resistance. 2500W: 20 to 23 Approximately

240 VAC

32064302 120 VAC Infinite switch Time On Time Off 31926701 240 VAC 31926702 240 VAC LO 5% 95% 32064702 240 VAC MED (4-5) 50% 50%

HI 100% 0%

31954301 Oven temperature 240 VAC, if not replace switch. sensor Approximately 1100 at room temperature 75°F.

32078201 Control limit Normally Closed If open at room temperature, replace. 31967101 Bake element Verify proper operation. 31967302 Broil element Continuity Closed …………215°F ………………… Infinite Open……………245°F …………………

Disconnect wire leads to element Continuity, approximately 20 ,

and measure resistance of terminals. if not replace.

Measure voltage at bake element. 240 VAC, see wiring diagram for terminal identification. Disconnect wire leads to element If no voltage is present at bake element and measure resistance of terminals. check wiring.

Continuity, approximately 19 , if not replace.

Measure voltage at broil element. 240 VAC, see wiring diagram for terminal identification. If no voltage is present at broil element check wiring.

36-32090401-0 2 October 2001

Component Testing Information

! WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power to oven before servicing, unless testing requires power.

Illustration Component Test Procedure Results 31946302 Hinge ! CAUTION

Do not place hands in hinge area when oven door is removed. Hinge can snap closed and pinch hands or fingers.

32040901 Auto latch assembly Motor switch Unlocked ……………………………… 32059601B Black Locked…………………………………. COM N.O. continuity 32059602C Bisque COM N.O. open 32059603W White Door switch Open……………………………………. COM N.C. open Closed …………………………………. COM N.C. continuity

BAKE CLEAN 1 2 3 BROIL CLOCK 4 5 6

OVEN COOK STOP TIMER 7 8 9 LIGHT ON/OFF

START OVEN 0 CANCEL

Features

VFD Display 12 Hour Clock 12 Hour Shutoff Sabbath Mode (12 hour over ride) Hour/Minute Timer (11:59) Timed or Delay Bake to (11:59) Variable Self Clean (2 4 hours) Variable Broil Broil interrupt door open over 3 minutes Child Lockout

October 2001 3 36-32090401-0

Component Testing Information

! WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power to oven before servicing, unless testing requires power.

Illustration Component Test Procedure Results ERC Controlled ERC – Sigma F0-0 – No error. Initial factory setting. Touchmatic electronic F1-1 – Over temperature while Check sensor and wiring first, replace ERC Controlled range control control if sensor is good. cooking. Check sensor and wiring first, replace ERC Controlled Temperature F1-3 – Over temperature while control if sensor is good. adjustment Replace control. ERC Controlled (BAKE mode only) cleaning. Verify wire connections are tight and ERC Controlled F1-5 – Cancel key input out of range. replace control if failed. Sabbath mode F1-7 – Keyboard disconnected. Replace control. (BAKE mode only) Replace control. F1-8 – Shorted key. Replace control. Twelve hour off F1-9 – Slave micro not functioning. Replace control. Child lock out F1-A – VCC/GND lift off. Replace control. F1-C – Control not calibrated. Check wire connections and sensor. F1-E – EEPROM data corruption. Check wiring, motor, and latch switch. F3-1 – Sensor or sensor circuit failure. Check wiring, motor, and latch switch. F9-1 – Auto latch will not lock. While increasing or decreasing oven F9-2 – Auto latch will not unlock. temperature, this does affect Press BAKE pad. self-cleaning temperature. Press in oven temperature of 500°F. Immediately press and hold BAKE Temperature adjustment will be retained until current offset appears in display, even through a power failure. approximately 3 seconds. To decrease or increase oven Offset is a wrap-around function from 35° to temperature. Press BAKE until -35° in 5° increments. negative or positive offset appears. Oven can be adjusted from 35° to – Sabbath mode will disable the 12 hour 35°. To avoid over adjusting oven shut-off to allow baking operation for a move temperature in 5° increments maximum of 37 hours. each time. Press START to accept offset setting The state of the oven light must be set or press CANCEL to restore to before entering Sabbath mode. If oven previous offset setting. light was on when Sabbath mode was activated oven light will remain on. If oven Press BAKE, enter desired light was off when Sabbath mode was temperature and press START. Press activated oven light will remain off. the 8 key and hold for 3 seconds. The STAR symbol will flash and “Sab” is All prompts, messages, timed cook displayed in the temperature digits modes, and alert tones are deactivated area. The STAR will flash for 5 while in the Sabbath mode. All keys are seconds until Sabbath mode initiates disabled except CANCEL and the 8 key and temperature displays. Pressing CANCEL will deactivate the Sabbath Control input features will be disabled mode and cancel the bake operation. and display will indicate the padlock Sabbath mode can also be cancelled symbol. by pressing and holding the 8 key for 3 seconds, but bake operation will continue. BAKE and ON indicators will illuminate in display during bake operation.

Control will automatically cancel any cooking operation and remove all relay drives 12 hours after the last pad touch. Press the 7 key and hold for 3 seconds. Control will return to normal operation by repeating the procedure.

36-32090401-0 4 October 2001

Wiring Diagram and Schematic

! WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power to oven before servicing, unless testing requires power.

October 2001 5 36-32090401-0

Wiring Diagram and Schematic

! WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power to oven before servicing, unless testing requires power.

36-32090401-0 6 October 2001

Notes

October 2001 7 36-32090401-0

Notes

36-32090401-0 8 October 2001